The GL-1102 turntable is currently the most advanced turntable on offer. This model has a built-in linear arm with two bases, thus giving maximum rigidity and stability. The modern solutions used guarantee the balance, harmony and exceptional precision of the reproduced vinyl records.
Silence
This model has a noiseless external compressor. The compressor guarantees quiet noiseless operation, does not cause vibration / noise interference. The arm with the suspended fold moves linearly along the guide which in the upper part has holes from which air is extracted.
Description
It is possible to order the model with RGB led backlight or without backlight. The control panel located on the side of the turntable allows you to change the speed, correct the rotation of the platter, as well as turn on / off the compressor. It should be noted that a turntable requires a table that can lift a 55kg turntable. The plate is suspended on a magnetic bearing based on neodymium permanent magnets.
For whom?
The GL-11 turntable is ideally suited to enthusiasts who value exceptional sound at the highest level, who are looking for a modern look and unique solutions.
Examples of design changes available on request?
The following changes can be made on the GL-11 series turntables:
- direct drive - Plinth can be made of a different type of granite
Technical specyfication
Arm GL-1102AN Counterweight for 4-12g inserts 2 x belt drive DC 12V motor Rotational speeds 33.33 / 45.11 a.m. Speed change by switch Active arm length 70mm Arm weight 40g Height adjustment (VTA) yes Arm length adjustment yes Guide level adjustment yes Base level adjustment yes Dimensions and weight of plate No. 1 310 x 20 x 2kg Plate bearing No. 2 the AIR system RGB plate backlight Turntable dimensions 540 x 360 x 200 Gramophone weight wooden base 25kg Gramophone weight 60kg granite base 110-240V / 50-60Hz power supply 16W power consumption COMPRESSOR: Pressure 0 - 0.050MPa Noise level 20dB Dimensions 250 x 300 x 150 Weight 10kg