Kategorier

Kategorier
Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes
  • Ad Fontes

Ad Fontes

49 900,00 kr
39 920,00 kr Spara 20%
Inkl. moms

Ad Fontes

Kvantitet
Sista produkten i lager

 

 

Ad Fontes

The basis turntable made of wood elements of different density, glued in several layers to the press about the pressure of several hundred kilograms. The dimensions of the base of a specific irregular shape is 55 x 40 cm, and the weight is approx. 5.5 kg. The base is based on three legs in the shape of a cone of adjustable height sufficient to properly level the whole. Additionally, the client receives pads spikes. You can choose from several veneers in basic versions: walnut, redpoll, yew, oak or mahogany, painted with synthetic varnish resistant to moisture. As shown by the attached photos is also possible to order a turntable in a different color - even in black, finished in high gloss (of course, for an additional fee). A housing in which is mounted a regulator-stabilizer rotation delivered to the test are made of aluminum, but can also be finished in the same veneer as the base turntable. At the front there are two simple switches (switch, and the switch turns), and precise speed control knob. The controller itself is based on stabilizers merged with line 317 and solid state generally available, but good quality. Speed selection (33 or 45 RPM) is carried out by means of a switch, so you can also set a speed of about 100 RPM, suitable for those who like cloth to wipe the disc spinning a plate. Setting the proper rotation is done using a stroboscopic disc, which the customer receives complete with turntable.
Builder uses a DC motor Maxon or another of similar quality and performance. Motors are selected for the intensity of sound that they emit. The motor housing is always the same shape, but it can be ordered in different types of finishes such as aluminum .: polished, matt or painted and jointed with metal. The cable connecting the motor and controller is about 1 m in length. The motor housing is undecomposable.



 

 

 

 

 

Used tonarm length 14 inches with 4 points of support on balls or cones. The arm is made of brushed aluminum - the same tube arm can be ordered in aluminum or carbon. Acentric arm is equipped with a counterweight construction decoupled from the shoulder with a silicone distance. Tactile feedback can be done without tools, by using screws fastening a counterweight to the tube arm equipped with a large "its head" - so that it can tighten and loosen your fingers.
Adjustments available to the user: VTA in the range of + - 15 mm, przesięg ("overhang") is controlled within + - 10 mm, the head of the insert is adjustable +/- 45 degrees. The counterweight to calibrate the pressure arm for inserts weighing from 4 to 20 grams. It is also optional, additional pressure adjustment within +/- 0.2 grams of additional weight on the threaded rod. The arm is neutral and does not require anti-skate adjustment. Wiring leads arm - face copper in cotton, consisting of 10-16 enamel wire having a diameter of 0.05 mm for each strand. The wires are unshielded and their use in the basic version ensures the correct operation of MM cartridges. The test version provided to Mr. Andrew has applied an additional coating on the section of wires running out of the tube shoulder, because he knew that I was going to mount it also insert the MC. Tips for tie-liners are gold-plated.
Curb weight of the arm is between 12-18 grams, depending on the version. Preferred are so MM cartridges with low weight and high vulnerability. Mr. Andrew recommends inserts Ortofon and Goldring, because those tested in his arm tested alone or buyers of these turntables. This does not mean that you can not use any other inserts, bearing in mind the saying of the conditions of low weight and high vulnerability. Lift arm provides its descent over 0.5 to 2 seconds, depending on the preference of the customer. The arm is calibrated for a dedicated plate. Of course, along with the turntable purchaser receives a template that allows you to set the basic parameters of the arm.
A plate made of solid aluminum, which provides the weight of the order of 10-14 kg, depending on the height / thickness of the plate. Pad diameter is 300 mm. You can also request a turntable with a plate of multi-layered, in which the layers are combined, eg. Aluminum and acrylic. The bearing plate is made in the classic version of the slide bearing supported on the ball and Teflon pad. It does not require intervention and lubrication more often than once a year. The bearing is intended for loads up to 50 kg, should therefore bear without harm each and every pressure plate.
The drive belt of circular cross-section or square, with a length of 1 meter is made of rubber. The average life of the belt is about one year. Each turntable is equipped with a spare belt.
The standard equipment also includes the puck into singles, level and weight to pressure settings.
Clamp according to the preferences of the buyer, weighing 200-500 grams, is made additionally on request. The customer also receives a mat on the plate, rubber or felt.
The turntable is not equipped as standard with an insert, but the constructor is recommended even provide him with landing pads, as its presence is necessary for the correct calibration of the arm.

Leveranstid 4 veckor efter betalning. Frakt fri.

Vid beställning ber om onskemål vad Ni vill ha. Vi kan utföra en vinylspelare med material som specificeras av kunden.

1 Produkt