Kategorier

Kategorier
Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322
  • Micro Seiki.MR-322

Micro Seiki MR-322

9 900,00 kr
Inkl. moms

Vinylspelare

Kvantitet
Slut i Lager


Servad december 2020. Fint skick bra ljud. Bra japansk spelare.

micro

 

Rating of a mode
FormRecord player
<Turntable part>
Drive systemBelt drive scheme
Motor4 pole hysteresis synchronous outer rotor motor
Rotational frequency33 1 / 3 or 45rpm
TurntableThe product made from 30cm aluminum die-casting, 1kg
Rotation unevenness0.08% or less
S/N ratio48dB or more
<Tone arm part>
FormStatic balance type
Total length300mm
Effective length222mm
Overhang15mm
Offset angle21 degrees
The maximum tracking error1.5 degrees or less
Inside force cancellerThe formula corresponding to a stylus force
Conformity cartridge self-weight4g-11g
Stylus-force variable span0-3g (one rotation)
<Cartridge part>
Formman-month type (M-2100/6)
Frequency characteristic span10Hz - 28kHz
Output balance�}0.5dB (1kHz)
Channel separation30dB(1kHz)
Output voltage6mV (1kHz, 3.54 cm/s)
Load resistance50kohms - 100kohm
The optimal stylus force2g
Needle point0.6mil diamond needle
Compliance25x10 to 6 cm/dyne
Self-weight4g
Switching needleV-2100/6(3,600yen) 
V-2100/5(3,600yen) 
V-2100/e(5,600v)
<Synthesis>
Power sourceAC100V, 50Hz/60Hz
Power consumption12W
DimensionsWidth 459x height 171x depth of 365mm
Weight8.5kg
 
 
The belt drive player which carries the tone arm of the class highest class. 

The turntable made from aluminum die-casting is adopted as a turntable, and the drive system serves as a belt drive scheme using 4 pole outer rotor type motor with a die-casting radiator. 
With the die-casting radiator, the improvement in the heat-dissipation effect and the oscillating reduction of a motor are realized, and the endurance is improved. 

The power switch is incorporated in the arm rest and has become a updation of the belt with the interlocking type with the high belt nowait-lock organization of an effect. 

The full-scale bearing is used for the rotation fraction of a tone arm, and the high die-casting shell of a special composition pipe and a synthetic is adopted as it. 
Moreover, the inside force canceller original with a micro spring tension type is carried, and tracing capacity is heightened. 

Vi ger 3 månaders garanti, 30 dagars bytesrätt och 10 dagars öppet köp när du köper begagnade produkter från Vinylborsen-skivbutik.